 |
Driveway Alarm Accessories |
| Used in many homes and businesses, driveway alarms are your first line of protection. Always know if someone has entered your property or is waiting in your drive-thru. Accessories allow you even greater convenience. |
|
Indoor/Outdoor Fire Alarm Bell 12V |
 | |
The Firebell Indoor/Outdoor bells utilize a specially designed gong that gives out a loud mechanical resonant tone. Designed for more effectiveness and will provide better performance and dependability at a lower current consumption than previous models. The bell design incorporates a micro-motor with built-in varistor suppression element to reduce RFI and EMI interference found in today's highly integrated microprocessor driven control panels. Then terminal design makes it convenient when wiring or troubleshooting. The design features as a result saves you time and provides a more effective installation for maximum performance.
- Indoor/Outdoor motor driven design
- UL Listed for fire protective service
- Polarized models with wide listed voltage range using filtered DC or unfiltered FWR input voltage.
- Terminals for fast in/out field wiring.
- High sound dB output with low current draw.
- Built-in trim plate for a clean flush mount installation.
- Input terminals for field wiring using AWG 12 to 18.
- RFI and EMI noise suppression element built-in.
- Red color.
- 6 Inch Bell
- NEW 24V version now available!
|
- Know how many entered or left your driveway.
- Plugs into the side of the receiver.
|
- This unit can turn on lights & ring remote door bells
- Plugs into the side of the receiver and then into a 110V AC plug and transmits a signal through your house wiring to activate the Remote Chime or the Lamp Module.
|
- Will work anywhere in your home.
- Requires X10 Interface module above.
|
- Just plug in your lamp It will turn on a lamp when the driveway alarm is tripped.
- Requires X10 Interface module above.
|
|
Two-Tone Ding Dong Doorbell |
- Plugs into the side of your Driveway Alarm receiver.
|
- Extra loud and you may use out doors
- Wires into the receiver
|
 | |
FEATURES
- Works great with our Driveway Informer and the DA50 Entrance Alert.
- Perfect for "informative" household burglar alarm use and many other applications.
- Incorrect polarity cannot damage circuit or draw current.
- Easy 2-wire installation, regardless of voltage. Also, if the strobe light is being powered by a backup battery, as the battery is drained the strobe light will continue to function.
- Low current consumption with long operating lifespan of over
- 300 continuous hours (2,000,000 flashes).
- Includes blue lens.
- Lens is made of high-impact resistant acrylic, case of high-impact resistant ABS plastic.
- Use in temperature ranging from -22OF(-30OC) to 140OF (60OC).
- For 6 to 12-Volt use.
SPECIFICATIONS
- CIRCUITS
All solid-state
- INPUT CONNECTIONS
Red/Positive
Black/Ground
- LEADS
#20 Gauge UL listed
- ELECTRICAL PROTECTION
Reverse polarity protected
- OPERATING LIFE
Over 2,000,000 flashes (300 hours continuous)
- ENVIRONMENT
-22OF (-30OC) to 140OF (60OC)
- BASE
High-impact black ABS
- LENS
High-impact resistant acrylic.
Strobe light addon for many products including the Driveway Informer and DA50 Entrance Alert. |
- Plugs into the side of the receiver.
- Produces a buzzing sound.
|
|
 |
